Harico IC 7000 | How to SET CTCSS memory frequency | 136-174/400-520MHz

Harico IC-7000 136-174/400-520MHz Cross band repeater function radio https://www.409shop.com/409shop_product.php?id=123969 Description: 1. Before using cross band repeater function, you should turn on this function via programming software, please kindly note that you should read data from radio first when you program it. 2. Turn on the cross band repeater via programming software -Optional function -Cross band repeater -On. 3. If you want to turn on/off cross band repeater function by menu 11, please set via programming software -Optional function -Cross band repeater manual setting - On, then you can turn it on/off in the menu 11. 4. Note: when you use this function, please do not make transmitting frequency as 3 times of receiving frequency, or vice versa, eg. TX one = 145.025MHz and RX = 435.075MHz or RX one = 145.025MHz and TX = 435.075MHz will cause radios to transmit all the time, even you turn off the radios, in this case, please just press PTT and change the frequency, radio will work properly, so please avoid to use such frequencies. BUY IT NOW: https://www.409shop.com/409shop_product.php?id=123969 Website: https://www.409shop.com Whatsapp: +852 54457217 Office: 852 31470212 YouTube: https://www.youtube.com/user/409shop409 Instagram: https://www.instagram.com/409shop/?hl=zh-tw

Surecom SS10 | Field Strength Power Test Meter Portable Field Strength ...

Surecom SS10 Field Strength Power Test Meter Portable Field Strength Display 100K-3000MHz Field

SS10--- https://www.409shop.com/409shop_product.php?id=126992

 

Surecom SS10 RF Signal Strength Meter

The SS-10  Field  Strength  Meter  is  ideal  for  reading  relative  field  strength  from your antenna.

 It is a compact unit that fits in the palm of your hand and can be  taken  anywhere.   

The  best  part  of  using  it  is  that  you  now  can  tell  if  your  antenna  is  radiating  or  not  by  simply  holding  the  unit  near  your  antenna  and  adjusting  the  sensitivity.    Also,  by  taking  measurements,  you  can  find  out  relatively how strong your antenna field is. Operation The  SS-10  Field  Strength  Meter  is  very  simple  to  use.    It  requires  no  power  because  your  antenna  field  provides  the  power  necessary  to  run  the  meter.   

Simply raise the single whip antenna on your unit, stand several feet away, and adjust  the  sensitivity  knob  on  the  front,  it’s  that  easy.   

You  want  to  ensure  that  the  whip  antenna  is  parallel  with  the  polarity  of  the  antenna  you  are  reading.   

Now you can read the relative field strength of your antenna.

 

Features:

The appearance is simple and efficient, beautiful and generous.

Frequency bandwidth, high sensitivity. 100KHz-3000MHz (with antenna ), please use different frequency antennas to test signals with different frequencies for better effect and sensitivity)

The pointer amplitude can be adjusted (to protect the meter)

Built-in automatic damping function, which is the buffer function, prevents the needle from swinging too fast and causing damage.

Small size, easy to carry, size: 75 x 100 x 64mm (excluding the raised antenna part)

 

Key Specifications:

Test suitable antenna for walkie-talkie use

Frequency bandwidth, high sensitivity. 100KHz-3000MHz

Measurement Radio Field  Strength

The pointer amplitude can be adjusted (to protect the meter)

 

Specifications:

Model No. SS-10

Frequency Range: 100KHz -3GHz

Size without Socket : 75 x 100 x 64mm

 Antenna (in ) Interface: SMA Female

Net Weight : 240g (not include antenna)

 

Package include

1x SS-10  Field  Strength  Meter

1x SMA MALE UHF Telescopic Antenna

1x English Instructions

 

 

🛒BUY IT NOW: https://www.409shop.com/409shop_product.php?id=126992

 

📍Website: https://www.409shop.com

📍Whatsapp: +852 54457217

📍Office: 852 31470212

📍YouTube: https://www.youtube.com/user/409shop409

📍Instagram: https://www.instagram.com/409shop/?hl=zh-tw#409shop

 

#surecom #walkietalkie #radio #SS10 # PowerMeter  #